mobile

Hi, today im going to show you how to root your E1 and install a custom recovery with locked bootloader.
First, ROOT
-If you are on 20.1.A.0.47 you can root it just by simply installing towelroot from here
https://www.androidfilehost.com/?fid=23681161096070831
-But if you are on 20.1.A.2.12 or 20.1.A.2.13 or 20.1.A.2.14 it will e a little harder
You will need 2 things:
-FlashTool ( 0.9.18.4 or above)
-And the 20.1.A.0.47 https://mega.co.nz/#!1dhhELjS!6f0j44...yJLNPy-khdTd6E
1.Start FlashTool
2.Put the firmware that you downloaded into C:/Flashtool/firmwares
3.Click the flash icon on top left
4.Select flashmode and select the downloaded firmware
5.On top right you will have two boxex: CACHE and DATA (you can untick them if you don`t want to lose any data)
6.Down right you have some boxes, untick everything except KERNEL
7.Select flash
8.Hold the volume down button while connecting to the computer
9.Wait
10.Unplug your phone, install Towelroot from the link above and that`s it

Installing recovery:
Now that we are rooted, we can flash a recovery but before we start we need 2 things
ROOT and USB DEBUGGING, make sure you have them
Now, download Bootstrap Alpha 0.1 from down below and extract it somewhere you can easily find it
Connect your E1 and make sure that it`s connected
^^IF IT`S THE FIRST TIME YOU CONNECT WITH USB DEBUGGING ON WAIT UNTIL YOU SEE A USB DEUGGING PERMISSION SCREEN, TICK ALLOW EVERY TIME THEN HIT ALLOW^^
Now, run the install.bat and wait about 15-20 sec. then your E1 should reboot, wait until you see a blue LED, when you see it press the volume DOWN button 3 times, just so we are sure it`s entering the recovery
DONE!!!!
--THIS METHOD WORK WITH BOTH SINGLE OR DUAL E1--

Every thing work fine including flashing roms and zips but if you install a rom you will have to install the recovery again

Attached Files

Bootstrap Alpha 0.1.zip - [Click for QR Code] (5.36 MB)