Inductive charging for the Note 8.0 topic
This thread is dedicated to the development of an inductive charging mod for the Galaxy Note 8.0.
To sum up what is already known:
In another thread I had identified 2 contact pads at the bottom of the mainboard which were particularly interesting. Mainly because they were right near the connector to the Usb board as well as the battery connector.
These contacts are not used for anything else such as a speaker or antenna (at least on the Wi-Fi version).
Neither of the two large pads are connected to Ground nor VCC, but some of the smaller pads are.
If there is anyone has a bricked Note 8 and would like to donate it's PCB, it would definitely help with figuring out what these pads are. High res pics of the other side of the mainboard would work as well.
To sum up what is already known:
- The Note 8.0 DOES NOT have built in wireless charging capabilities.
- Generic 500mA Micro USB Qi receivers do not appear to work (It isn't yet known if 1000mA ones do)
In another thread I had identified 2 contact pads at the bottom of the mainboard which were particularly interesting. Mainly because they were right near the connector to the Usb board as well as the battery connector.
These contacts are not used for anything else such as a speaker or antenna (at least on the Wi-Fi version).
Neither of the two large pads are connected to Ground nor VCC, but some of the smaller pads are.
If there is anyone has a bricked Note 8 and would like to donate it's PCB, it would definitely help with figuring out what these pads are. High res pics of the other side of the mainboard would work as well.
xda-developers
0 commentaires:
Enregistrer un commentaire