Chinese head unit death of GPS with my stupidity topic
Hi Folks, Firstly I know I have been very stupid. Please don't make me feel worse than I already do. I have read through this board and after feeling like I was about to give in trying to fix my Chinese GPS I have a bit of hope. I bought the unit as working from ebay and decided (stupidly) to flash Mio Pocket after a guy on a car forum sung its praises. I initially meant to run from the sd to test but I accidentally clicked install and it did its thing then froze on reboot. After rebooting it was just stuck on the screen saying Welcome to Navigation. I have measured my screen, it seems to be 6.5" measured diagonally
I found a chinese site and have tried all the firmware on there, it all seems to restore my original GPS side of the software but the screen is the wrong resolution and too low on the screen. I can just about calibrate it by poking my nail down the bezel for the lower calibration points but then when I select the navigation source selection screen I cant see the files as they are off to the left (off screen) I tried using the remote to no avail. I have also tried the 117_nav_en.exe floating around on the internet which again seems to be the right software but the wrong resolution. My problem is that I bought the unit off ebay and I don't know the brand or model number to contact support. Neither does the seller unfortunately (it was used)
The unit is for a Skoda / VW it has GPS, BT, TV Tuner, 2 x sd slots (one for nav one for media) and an iphone input on the front. It has the car door open indicator pictures etc and the non ce side of things is still working fine.
I am reasonably confident that the firmware I have tried so far is for bigger screens than my 6.5" and hopefully if I can find a firmware version for this size I should be ok.
I have included an image of how it currently looks
I really hope someone can help me
Thanks for reading
I found a chinese site and have tried all the firmware on there, it all seems to restore my original GPS side of the software but the screen is the wrong resolution and too low on the screen. I can just about calibrate it by poking my nail down the bezel for the lower calibration points but then when I select the navigation source selection screen I cant see the files as they are off to the left (off screen) I tried using the remote to no avail. I have also tried the 117_nav_en.exe floating around on the internet which again seems to be the right software but the wrong resolution. My problem is that I bought the unit off ebay and I don't know the brand or model number to contact support. Neither does the seller unfortunately (it was used)
The unit is for a Skoda / VW it has GPS, BT, TV Tuner, 2 x sd slots (one for nav one for media) and an iphone input on the front. It has the car door open indicator pictures etc and the non ce side of things is still working fine.
I am reasonably confident that the firmware I have tried so far is for bigger screens than my 6.5" and hopefully if I can find a firmware version for this size I should be ok.
I have included an image of how it currently looks
I really hope someone can help me
Thanks for reading
xda-developers
0 commentaires:
Enregistrer un commentaire