Boost Mobile (CDMA) Moto E 2015 Stock Firmware Restore Guide topic
Hello all!
In an effort to try and help Boost Mobile users out, I have put together a stock restore guide for the Moto E 2015. There are other versions of a stock firmware guide, but those are for GSM and others not using CDMA. Here you will find steps to restore your Boost Mobile Moto E!
First off, I am NOT responsible for damaging your phone or any user error. USE THIS GUIDE AT YOUR OWN RISK!
If you are here reading this guide, you have either bricked your device or just want to go back to the stock firmware. If you are using a custom recovery such as TWRP, any saved nandroid backups will be lost if saved on internal storage. This will factory load 5.0.2 Lollipop fresh out of the box the day you got your phone!
Firstly, you will need ABD and Fastboot and Motorola Device Manager. You can download Motorola Device Manager directly from here.
I have attached ABD and Fastboot to this post for download.
To use ABD and Fastboot, you will need to make a new folder and extract the zip to the new folder and name it whatever you like. From there, you will need to launch a command window from that folder. The easiest way to do this is to to have that folder selected and Shift/right click and "Open command window here". From there, if you have done this right, you will have a command prompt window ready to go!
After you have setup your new folder with ABD and Fastboot, you are ready to load the stock firmware to your Moto E! Download link is here
After you have downloaded your stock firmware, double check to make sure you have XT1526_Updated_SURNIA_BOOST_5.0.2_LXI22.50-14.6_cid9_subsidy-DEFAULT_CFC.xml.zip
Extract the contents of the file you downloaded to the folder where you put your ABD and Fastboot in.
Once you have everything ready to go, power down your phone and put it in bootloader mode. Hold power and volume down for a few seconds and you are there. Attach your USB cable from your PC to the phone and be ready to load several lines of code. Flash these codes in order. Copy and paste if you like in to your command prompt, one line at a time!
Once you have done this, restart your phone and wait a few minutes for the boot sequence to start. If you have done this right, your phone will be factory fresh with the stock firmware on it! :D
If I was able to help out, hit thanks! :good:
This is my first guide and I had to look everywhere to find out how to do this for Boost variants, and hopefully it is ok for everyone to use! :cool:
In an effort to try and help Boost Mobile users out, I have put together a stock restore guide for the Moto E 2015. There are other versions of a stock firmware guide, but those are for GSM and others not using CDMA. Here you will find steps to restore your Boost Mobile Moto E!
First off, I am NOT responsible for damaging your phone or any user error. USE THIS GUIDE AT YOUR OWN RISK!
If you are here reading this guide, you have either bricked your device or just want to go back to the stock firmware. If you are using a custom recovery such as TWRP, any saved nandroid backups will be lost if saved on internal storage. This will factory load 5.0.2 Lollipop fresh out of the box the day you got your phone!
Firstly, you will need ABD and Fastboot and Motorola Device Manager. You can download Motorola Device Manager directly from here.
I have attached ABD and Fastboot to this post for download.
To use ABD and Fastboot, you will need to make a new folder and extract the zip to the new folder and name it whatever you like. From there, you will need to launch a command window from that folder. The easiest way to do this is to to have that folder selected and Shift/right click and "Open command window here". From there, if you have done this right, you will have a command prompt window ready to go!
After you have setup your new folder with ABD and Fastboot, you are ready to load the stock firmware to your Moto E! Download link is here
After you have downloaded your stock firmware, double check to make sure you have XT1526_Updated_SURNIA_BOOST_5.0.2_LXI22.50-14.6_cid9_subsidy-DEFAULT_CFC.xml.zip
Extract the contents of the file you downloaded to the folder where you put your ABD and Fastboot in.
Once you have everything ready to go, power down your phone and put it in bootloader mode. Hold power and volume down for a few seconds and you are there. Attach your USB cable from your PC to the phone and be ready to load several lines of code. Flash these codes in order. Copy and paste if you like in to your command prompt, one line at a time!
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem config carrier
fastboot oem fb_mode_clearIf I was able to help out, hit thanks! :good:
This is my first guide and I had to look everywhere to find out how to do this for Boost variants, and hopefully it is ok for everyone to use! :cool:
xda-developers
0 commentaires:
Enregistrer un commentaire